Rhino™ 9300
Rhino™ 2300
Rhino™ 1501
Primer 1500
Rhino™ 405
FastFloor DF
FastFloor HB

Rhino™ 9300 - Novolac Self Leveling Epoxy Coating

Rhino 9300 - A Novolac Self Leveling Epoxy Coating that is a high quality Bis-F epoxy with superior chemical and abrasion resistance versus Bis-A type epoxy resins. This tightly cross-linked, self-leveling epoxy system cures in the presence of moisture and humidity with excellent mechanical properties. Rhino 9300 mixes using the industry standard, 2:1 by volume ratio. Having low odor, Rhino 9300 contains no solvents and is 100% solids that assures ease of application.
More Photos

Features & Benefits:

  • Superior chemical and abrasion resistance
  • Medium viscosity
  • Excellent bonding
  • Highly resistant to cratering or blush
  • Dries to a high gloss
  • Low odor
  • 100% solids, no solvents
  • Cures in the presence of moisture and humidity with excellent mechanical properties

 

Applications:

  • Recommended for floor coating and bermed secondary containment areas where high concentrations of chemicals are used.
  • Application where increased resistance to acids, bases and solvents is desired.
  • Non-slip surfaces can be achieved with broadcast of quartz, aluminum oxide or other non-skid material.

Specs

Application Properties at 77°F (25°C):

  • Solids by Volume (%)                         100%
  • Volatile Organic Content (VOC)        0 lbs./gal
  • Mixing Ratio                                          2:1 by volume
  • Viscosity                                                500 – 800 cps, mixed
  • Pot Life (neat coating)                        25 – 30 minutes
  • Application Temperature                   55°F minimum, 100°F maximum
  • Maximum Re-coat Time                    24 hours
  • Dry To Touch                                        6 – 8 hours
  • Light Traffic                                           14 – 16 hours
  • Return To Service                                24 – 36 hours
  • Full Cure                                                7 days

  • Rhino 9300 Novolac complies with ACI Standard 503.1 - 4 and ASTM C-881-90 Type I, II, IV, V, VI and VII. Grade 2, Class B, C, D, E and F. Rhino 9300 cures in presence of moisture and humidity. 

 

Physical Properties for Cured System (cured 7 days at 77°F (25°C)):

 

  • Hardness (Shore D)                           86±5
  • Tensile Strength (psi)                         7000–8000    ASTM D-638
  • Tensile Elongation (%)                       3.2           ASTM D-638           
  • Flexural Strength (psi)                         13000–13800        ASTM D-790
  • Compressive Strength (psi)               12000–14000        ASTM D-695
  • HDT (F)                                                        140    ASTM D-648-264
  • Water Absorption (% gain) 24 hrs   <1
  • Bond Strength (psi) to concrete        >400, w/ 100% concrete failure